MU-615A

The potentiometric encoder is heat resistant.

MU-615A is designed to convert the angle of rotation of the shaft into a linearly proportional output voltage Uout. The converter complies with the requirements of GOST RV 20.39.304 and KT-160D. The principle of operation of the angular displacement transducer MU-615M is based on the use of the Hall effect. Structurally, the MU-615M angular displacement transducer is made in the form of a housing with a cable; There is a connector on the end of the cable. The transducer housing contains a shaft on which a magnet is mounted. In the housing under the magnet there is a printed circuit board on which the integral Hall sensor (sensing element) and radio elements are mounted. The main element of the MU-615M is an integral Hall sensor (DH), the output voltage of which can be expressed by the following relationship: Ud.h. = f(B, Ipit d.h.), where: B is the projection of the magnetic field induction vector (on the sensitivity axis of the Hall sensor); Ipit d.h. - supply current of the integrated Hall sensor. The magnitude of the projection of the magnetic field induction vector B is directly proportional to the angle of rotation of the sensor shaft.